SNBC BTP-S80 Setup

Minimum Main Firmware FV1.140

1.  Download firmware  (BTP-S80_FV1140_POSASV20_MAIN_T02.JK)
2. Download and install SNBC Printer utility
3. Put SNBC printer on network and use netwinconfig on snbc printer utility to find printer
   1. Port Set
      1. 
      2. Printer should be found and dhcp should set printers ip address, select printer in IP address
4. In netwinconfig use Interface Firmware Update then select the .jk file you downloaded in step 1